Conductive nickel coating導電鎳覆蓋涂料
For Plastics用于塑料制品
A fast and easy way to shield plastic enclosures is by using a conductive paint containing nickel, copper or silver. The paint comes in aerosols for easy use, but can also be supplied in tins of 7 kg (3805) and 28 kg (3820) for larger quantities.
一個快的和容易的方法屏蔽塑料外殼是通過使用一個導電涂料包括鎳，銅或銀。該涂料以氣霧劑的形式起作用為了容易使用，但也能被供應以罐kg (3805) 和 28 kg (3820)用于大批量。
The nickel conductive coating contained in an air-drying acrylic resin.鎳覆蓋涂料包含在一個空氣干燥的丙烯酸樹脂里。
The resin becomes touch dry 15 minutes after application and achieves maximum conductivity within 24 hours. It is intended to prevent electrical interference, penetrating enclosures fabricated from thermoplastics and other insulating materials. The coating will also prevent static build up.
丙烯酸在應用15分鐘后變為接觸干燥，在24小時以內達到最大導電率。它計劃用于預防電干擾，能刺入外殼焊接部位從熱塑性塑料和其它的隔熱材料。該涂料也將預防靜電的增強。
It is recommended that an earth connection is made to achieve maximum shielding performance. A suitable material is copper shielding foil 3201 which may simply be pressed on or oversprayed. The applied coating has a matt grey textured finish.
它是被推薦的，做一個接地線以實現最大的屏蔽性能。一個合適的材料是銅屏蔽銅箔3201，可以簡單的被用力壓或被超范圍的噴涂。使用的涂料有一個無光澤灰色斑紋漆。
Benefits好處:
- Low surface resistivity of 0.9Ω/sq giving a high attenuation
- 低的表面電阻系數0.9Ω/sq，給出一個高衰減。
- Aerosol enables speed and ease of coverage of complex shapes
- 噴霧劑能夠加速和容易地覆蓋復雜的形狀。
- Delivery from stock
- 有現貨庫存可及時交貨
Shielding performance屏蔽性能
Frequency (Mhz) 頻率 | Reduction (dB) 減少 |
30 | 36 |
100 | 38 |
200 | 44 |
500 | 54 |
700 | 54 |
900 | 50 |
See Guarantee | |
Example舉例
Part numbers of conductive coating and glue.導電涂料和膠水的零件號
Part number零件號
3801
3801 : Aerosol 噴霧劑365 ml
3805 : Tin錫 5 liters升 (7kg)
3820 : Tin錫 20 liters升 (28Kg)
3838 : Conductive metallization導電金屬覆料
3850 : Silver coating 50gr 銀涂料
3980 : Conductive adhesive 50gr 導電粘合劑
